2019 Siesta Sprinter 24ST Table Base

[Dick1030]

We just brought home a used 2019 Siesta Sprinter 24ST with theater seating and the table that can be moved from in front of the the theater seats to in front of the reversed cockpit seats. The problem is that when we broke out the table, that was stored in the closet, to set it up, the table post doesn't fit the flanges in the floor. I assume there is an adapter that connects the table post to the floor flange. Am I correct? Or am I missing something much simpler here?

Thanks for your help.

Dick

[javelin]

I see you have no responses so far. Were you able to figure out your table post situation? While I am not familiar with your coach I am attaching a sales walk through video of your coach (I think) that shows the table post and the alternate post hole on the cockpit side, early on in the video. I hope you can tell by pausing the video at the correct time if your table post is the same as shown in the video. If this does not help, go back to the selling Dealer and ask them.....or look for a similar unit that maybe you can walk through. I hope this link works OK:



https://www.bing.com/videos/search?q...B6A2&FORM=VIRE

[JosephC]

Google research under " RV Pedestal Tables" yields much information thatmay assist you!

[Hooligan2]

2016 Siesta 24ST Table post is made by Springfield Marine. It is tapered on both ends and 28 inches long. The crimped end posts will not fit.
Website here; Springfield Marine Scratch & Dent Store

The sockets in the floor at the theater seats and the cockpit chairs are the same on mine. FWIW I made a wood table top to replace the original, it fits in the hanging closet when not in use.