Quote:
Originally Posted by dleonard02
- How do I input the solution to sanitize or winterize my plazzao 36.1?, and do I change the water filter?
|
Do you have the Anderson system on the Palazzo?
If so, there is a valve which has a position for sanitize/winterize.
For both remove the filter.
For winterizing, drain and by pass the water heater. open a bottle of antifreeze and connect a hose to the city water connection and place the end in the anti-freeze bottle. Turn on the water pump and then start opening faucets. The system will pump the anti-freeze through the lines and through the faucets.
For sanitizing the procedure is basically the same except after getting the solution into the lines and faucets, you pour the remaining solution into the fresh water tank and then fill the tank with water. Let it sit for about 3 or 4 hours and then drain and rinse the system.
I found the Anderson instruction incorrect in that anti freeze and sanitizing solution is not sucked into the tank before being pumped through the system.