Go Back   Thor Forums > Thor Tech Forums > Modifications and Updates
Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 03-16-2018, 03:32 PM   #1
Junior Member
 
Brand: Thor Motor Coach
Model: Vegas 25.3
State: California
Posts: 22
THOR #7103
Dream Dinette

The response from Thorís Customer Assistance when we asked for assistance on our Dream Dinette table that collapses was to take it to the dealer. Nearing our 1 year anniversary and not keen on driving 85 miles one-way, weíre thinking we probably can come up with a solution on our own. But I have a question. All of the photos I have seen the Dream Dinette has one support. Ours has two.

I went to Cass Hudsonís website and downloaded the installation PDF . . . only one support.

Having two supports really takes a lot of space under the table, and Iím thinking our problem is that the supports donít Ďsynchronizeí with each other. Maybe removing one would solve our problem. Looking for some feedback here . . . what do you think?
Attached Thumbnails
Click image for larger version

Name:	IMG_20170823_105635717.jpg
Views:	178
Size:	73.4 KB
ID:	9342  
__________________

__________________
Jiri & Lynne V.
2017 Vegas 25.3
Jirka is offline   Reply With Quote
Old 03-16-2018, 06:39 PM   #2
Senior Member
 
Brand: Thor Motor Coach
Model: hurricane 32n
State: Florida
Posts: 769
THOR #4158
I have one support and it is in the center. You may want to try that to see if it solves your problem, as mine is trouble free. Jerry
__________________

__________________
Jerry and Debbie
2015. Hurricane 32N /Kia Soul toad
Retired
Crawfordville Fl. Vietnam Vet.
Jegdrum5050 is offline   Reply With Quote
Old 03-16-2018, 09:24 PM   #3
Member
 
Brand: Thor Motor Coach
Model: Windsport 29M
State: Arizona
Posts: 88
THOR #9747
I have one support in the center and mine was collapsing also. I had the dealer adjust the latching mechanism when they were working on other issues I had. You may try to adjust where it latches to make it better.
__________________
Az Ernie is offline   Reply With Quote
Old 03-16-2018, 10:04 PM   #4
Senior Member
 
jpmihalk's Avatar
 
Brand: Thor Motor Coach
Model: Hurricane 35C
State: South Dakota
Posts: 1,132
THOR #3761
Our dream dinette has two supports. Not sure about the "synchronize" theory, but ours works... sometimes clunky but it works. Since it also doubles as a desk, I'm glad it has two supports, it is otherwise a very wide table (41.5") that I am afraid would sag on either side when used with our laptops, printers, etc. if it only had one support in the middle. For ours, to put it down both levers must be turned and then push on the table near the center near the wall to get it started.
__________________
John
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
jpmihalk is offline   Reply With Quote
Old 03-16-2018, 10:22 PM   #5
I Think We're Lost!
 
Bob Denman's Avatar
 
Brand: Still Looking
Model: Tiffin Wayfarer 24 BW
State: New York
Posts: 11,170
THOR #8860
(This is probably a stupid thought...)
Could you add a third support in between the other two?
__________________
Good Sam Member 843599689
FMCA Member F473304

Current coach: Tiffin Wayfarer 24 BW
Former coach: Thor Outlaw 29-H
Bob Denman is offline   Reply With Quote
Old 03-16-2018, 10:59 PM   #6
Senior Member
 
cobia13's Avatar
 
Brand: Thor Motor Coach
Model: ACE 29.3
State: Georgia
Posts: 128
THOR #7779
Dream Dinette

It has to be the most flimsy table around . I wish mine had 2 supports . When I took the unit home the first time the table fell off . Cheap !
__________________
cobia13 is offline   Reply With Quote
Old 03-23-2018, 09:40 PM   #7
Member
 
Brand: Thor Motor Coach
Model: Windsport 29M
State: Arizona
Posts: 88
THOR #9747
Quote:
Originally Posted by Az Ernie View Post
I have one support in the center and mine was collapsing also. I had the dealer adjust the latching mechanism when they were working on other issues I had. You may try to adjust where it latches to make it better.
You can see where the dealer repositioned the bracket on my table leg. Hope this helps. Click image for larger version

Name:	IMG_20180323_141629.jpg
Views:	88
Size:	36.3 KB
ID:	9431
__________________

__________________
Az Ernie is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Thor Industries or any of its affiliates. This is an independent, unofficial site.




All times are GMT. The time now is 10:33 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2
×