Go Back   Thor Forums > Thor Tech Forums > Modifications and Updates
Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 01-28-2018, 02:44 AM   #1
Junior Member
 
Brand: Thor Motor Coach
State: West Virginia
Posts: 9
THOR #10582
Gemini table

The removable table has a metal connector with several screws but itís screws are attached to the underside of the table top which is really soft compressed board. The top when you remove it pulls the screws out easily! I fixed mine and itís easy I hope this will help someone! I turned it over and of course took the screws out and released the metal pieces probably itís already came off. I took a wide piece of paper and made a template of the underside. I went to Loweís and purchased a thin piece of finished plywood. Used the template and marked it then cut it out. I glued the plywood to the underside of the top then put the metal connector and screwed it into the plywood with the same screws. Wouldnít have that problem again. I donít know how Thor thought that was going to hold up? They need to fix that design just like I did
__________________

__________________
Kenosfan is offline   Reply With Quote
Old 01-28-2018, 07:08 PM   #2
Senior Member
 
Brand: Thor Motor Coach
Model: Gemini 24TX (2017)
State: California
Posts: 1,232
THOR #5821
Had to do the same to ours, as it too pulled the screws out, probably the second time we used it. I also have a stand alone table that is on its own stand, which we really fine more useful then the original. We can always set the original table up in back, and still have the stand alone for the front, or outside if we want.
__________________

__________________
Laco is offline   Reply With Quote
Old 01-28-2018, 08:52 PM   #3
Junior Member
 
Brand: Thor Motor Coach
State: West Virginia
Posts: 9
THOR #10582
Quote:
Originally Posted by Laco View Post
Had to do the same to ours, as it too pulled the screws out, probably the second time we used it. I also have a stand alone table that is on its own stand, which we really fine more useful then the original. We can always set the original table up in back, and still have the stand alone for the front, or outside if we want.
Thanks for your reply. Interesting useing another table. I donít know if you have had this problem. But the face plate on the frig was lose when I bought the unit. It was really cut wrong. So Thor send a new one too the dealer well really not the dealer I purchased it because camp world bought them. It took awhile but it finally came in the put it on that was in Oct. weíre in Florida now and it came out and off. The bottom plastic piece is busted also. I got it back on but the glue behind it isnít sticky anymore I donít think they put anymore glue on it. So it looks like Iím going to have to glue it probably put some 3M spray glue on it and put it back on not sure how Iíll fix the plastics bottom piece. But itís obvious Camp World doesnít know how to keep it on. Iíve had the unit over a year there fix was just a few months ago I guess they will try it again underwatrenty although itís out and there two hours drive from my house. Will probably try to fix it myself. I understand this is a problem also. Thanks for reading
__________________
Kenosfan is offline   Reply With Quote
Old 01-28-2018, 09:44 PM   #4
Senior Member
 
Brand: Thor Motor Coach
Model: Gemini 24TX (2017)
State: California
Posts: 1,232
THOR #5821
Haven't had the frig problem, but have had the myriad of small frustrating issues (screws pulling out of cabinets etc.) most of us have had. The second table we bought it really for a Pleasure way, but works well in the Gemini.
__________________
Laco is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Thor Industries or any of its affiliates. This is an independent, unofficial site.




All times are GMT. The time now is 10:35 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2
×