Looking for Mod to change Sofa to a Booth w/Table for our 2018 Thor AXIS 24.1

[Bobstoy2]

Does anyone have a good idea of where to purchase a booth with table to replace the sofa in my 2018 Thor AXIS 24.1, My wife does not like the small table in front of the sofa and has trouble getting up when sitting on the sofa with the table setup. Any suggestions will be greatly appreciated. Thanks

[Beau388]

<https://www.recpro.com/rv-furniture/> has a good selection of RV furniture.

[robertconley]

Originally Posted by Beau388

<https://www.recpro.com/rv-furniture/> has a good selection of RV furniture.

We have an 2018 axis just removed the couch and Put in 2 Thomas Payne recliners they are a out 5 inches higher. And way more comfortable.

[Laco]

We use a tri-pod mounted, stand alone table instead of the post mounted table provided by Thor. Makes it, IMO, more versatile and can be easily used in front of the rear facing cab seats, as well as in front of the couch.

[mcr1010]

Originally Posted by Bobstoy2

Does anyone have a good idea of where to purchase a booth with table to replace the sofa in my 2018 Thor AXIS 24.1, My wife does not like the small table in front of the sofa and has trouble getting up when sitting on the sofa with the table setup. Any suggestions will be greatly appreciated. Thanks

I removed the couch a couple of years ago and installed a dinette that i bought from another member of the forum. There are a few others that have done the same. If you can find someone on the forum who has removed their dinette and want to sell it, you would be way ahead in cost and labor.
Only mod I had to make to it was to cut the width of the table a little. Also, made drawers to fit under the seats.
If you do a search on dinette mod, you can see them installed.

[robertconley]

I did pull the rubber feet off the bottom of the chairs to gain about an inch lower height.

[Bobstoy2]

Originally Posted by mcr1010

I removed the couch a couple of years ago and installed a dinette that i bought from another member of the forum. There are a few others that have done the same. If you can find someone on the forum who has removed their dinette and want to sell it, you would be way ahead in cost and labor.
Only mod I had to make to it was to cut the width of the table a little. Also, made drawers to fit under the seats.
If you do a search on dinette mod, you can see them installed.

Ideally I would like to find someone to swap the sofa bed for a dinette setup, Thanks for the info.

[Elvisjdr]

could you send me pictures of how to put drawers under dinette seats
thanks

[mcr1010]

Originally Posted by Elvisjdr

could you send me pictures of how to put drawers under dinette seats
thanks

Below are a few pics that may help. I made the drawers out of 1/8 or 3/16" ply which are light with pine stringers to stiffen. Not sure why the pics are posting side ways.

BTW, there was someone on the forum recently that was removing their dinette and installing either a sofa or recliners. If you do a search you may can find it and a deal.
Good luck