AGS Problems

[Dan Chock]

Anyone have a 2017 ARIS Motorhome that has AGS that will work on the first automatic start up, then disable the AGS on it's on for the next need to start the generator?
Then, the next issue is the ground fault receptacle in the bathroom clicks off on battery power, works on shore, or generator power???
Batterys can be fully charged Ground fault will trip??

[m1noel]

Originally Posted by Dan Chock

Anyone have a 2017 ARIS Motorhome that has AGS that will work on the first automatic start up, then disable the AGS on it's on for the next need to start the generator?
Then, the next issue is the ground fault receptacle in the bathroom clicks off on battery power, works on shore, or generator power???
Batterys can be fully charged Ground fault will trip??

I don't have the AGS issue that you describe. The GFI is a well known problem. The newer GFI's don't like modified sine wave inverters. There are some older GFI's still available, and a search for Aria GFI, will probably get you the model numbers that will work. We swapped out our inverter for a true sine wave unit and have not had another problem.
Mike

[JohnK]

Originally Posted by Dan Chock

Anyone have a 2017 ARIS Motorhome that has AGS that will work on the first automatic start up, then disable the AGS on it's on for the next need to start the generator?
Then, the next issue is the ground fault receptacle in the bathroom clicks off on battery power, works on shore, or generator power???
Batterys can be fully charged Ground fault will trip??

Mike is right about the GFI, I keep a spare with me, but will swap the inverter after my slide repair.

I thought I had an AGS problem, it turned out I did not get all the trigger parameters set right and I needed to turn off anything that would have a “demand” at the time I set it enabled. On our last trip I set the AGS and during the night the heat pumps needed to start so the generator started and ran until the heat pumps turned off.

Message me if you want to talk to discuss.

JohnK