Night shade reset

[vegas]

Does anyone know how to reset shade so it works when button is pressed. The motor is definitely running.

[SuperD]

As a matter of fact I do! Thanks to my friend who posted these pictures of the instructions!!! Follow the instructions and you should be good to go!

[Oneilkeys]

All you will,ever want to know.

[vegas]

Originally Posted by SuperD

As a matter of fact I do! Thanks to my friend who posted these pictures of the instructions!!! Follow the instructions and you should be good to go!



Attachment 5919



Attachment 5920

Thank you. I will try this today and hopefully it will work [emoji4]

[Thehobe1]

On my Thor Vegas, 2017, I do not have individual programming for the ignition "on" and the ignition "off" positions as decribed in the MCD manual:

http://mcdinnovations.com/files/Ownersmanual031318.pdf

I assume that the ignition wire was never connected to the MCD wiring so the shade memory is the same with the ignition on or off.

[Todd in CO]

Hi, I have a 2016 Thor Outlaw. The front sun/nightshade clips broke and the whole thing came crashing down tearing apart the wiring. New clips are installed...anyone have pointers on which wire goes where as I go to re attach them?

[DebM11]

HI - The windshield shade setting directions were driving me crazy, so I used the link from Colonel Ed Felker manual for Vegas/Axis, and the info for MCD Innovations and below is the link to the manual which matched my shade. I found page 6 but more so page 7 helpful. Page 7 instructions seemed more straight forward, set the high and mid point with ignition on, then move to ignition off for night shade length.
Hold the button, and the rocker, let go of button, bring shade to the level you think you want, bump it a bit lower if you need to, reverse direction up to your high point, etc.

Maybe this info will be helpful to others, as you all have been so helpful to us as somewhat new trippers to the road and to our 2016 Vegas.

http://mcdinnovations.com/files/Ownersmanual031318.pdf