Awning lights power switch

[Johnny1943]

There is no power at the awning led light switch. All fuses are OK.
Any ideas?

[Popfla]

Remove the switch from the wall and there MIGHT be an inline fuse in the wiring attached to it. No guarantee; it’s a Thor thing.

[Johnny1943]

Originally Posted by Popfla

Remove the switch from the wall and there MIGHT be an inline fuse in the wiring attached to it. No guarantee; it’s a Thor thing.

I want to thank you. Your suggestion was the solution I was looking for. I had no idea there was a fuse to the awning switch crammed up in the paneling.

My awning light is fixed.

Thanks again, Johnny

[Peterrrr]

Besides the fuse in the line also note if your unit has Rapid Camp controller to turn the light on, you have to use the Rapid Camp to also turn it off. The switch will not turn it off. After changing out the switch and fuse in the line I discovered this feature.

[redondomcb]

I have the same issue but i am not getting power to the awning light switch on our Qusntun RC25. The switch is fine and the fuse behind switch is ok. any ideas ? I used a volt meter to test if there is any power to switch. Where do the switch wires connect to 12 volt power ?

[Toddy]

Mirimar 37.1awning light doesnt work. No power to wires. Light works of remote switch/electric panel. All fuses are good thoughts before I call thor?