Electric Bunk Schwintek Controller

[bevedfelker]

I had posted a question asking if anyone knew where the Schwintek controller for the electric bunk was located for a Vegas 24.1. This is the same type of controller as used for the living room slide located in the storage compartment under the driver's seat.

I received an email from Thor Customer Service. The bunk controller is located inside the cabinet above the sink behind a false rear panel on the left hand side of the rear of the cabinet.

Thought I'd post this if anyone else needed to know where the controller is located for the Vegas/Axis 24.1.

[Oneilkeys]

Originally Posted by bevedfelker

I had posted a question asking if anyone knew where the Schwintek controller for the electric bunk was located for a Vegas 24.1. This is the same type of controller as used for the living room slide located in the storage compartment under the driver's seat.

I received an email from Thor Customer Service. The bunk controller is located inside the cabinet above the sink behind a false rear panel on the left hand side of the rear of the cabinet.

Thought I'd post this if anyone else needed to know where the controller is located for the Vegas/Axis 24.1.

It is in the same place in the 2016 Axis. Removing that side wall also gives you access to the passage from the TV above the door to that top compartment where the HDMI cable is, in case you want to add another cable.

[mcr1010]

Good info to know. Thanks.

[gmc]

On 2014 Hurricane - it is behind the false wall in the overhead cabinet between the bunk and the door.. same side that has the switch to raise/lower the bunk (at least a logical place...) Considering drilling a small hole to give view of the status light. Opened the panel to run some extra wires for another purpose - and found a fault code flashing away... (Short in Motor 2).