Quote:
Originally Posted by Kev
Here is the latest in the wet circuit board saga. I opened the panel, in between the rain drops, and found the off toggle switch. Thank you Mr. S  . I dried the circuit board with a hair dryer and put the switch back in the on position and no sound of the ignitor trying to start.  then put foam insulation around the opening and replaced the panel. After installing the panel I filled the gap around the panel with sealant. I started the furnace to make sure it worked and also figured the hot exhaust pipe would dry out any moisture. Because heavy rains are expected tonight I decided to play it safe and cover the panel with plastic. |
Nice job! Thanks for sharing.
Linear Mode
