25.1 Wiring Prints

[Bruce]

Here are more wiring prints for the Vegas/Axis 25.1









I asked Thor for these because i have a problem with the 12 volt circuit that runs to the rear room. It is intermittent.

What confused me is that the vanity lights are on the same circuit but always work. I spent hours trying to find where the wires run from the vanity to the back room.

When I received these prints today, I saw that there are two wiring harnesses running to the rear, one left side the other right side. The vanity lights are on the right side harness and remaining lights, fan are on the left side harness.

I hope the problem is in connector C41.

I am waiting on Thor to give me a hint on the location of the connector.

Bruce in NoLa

[KC8RXQ]

Bruce,
Did you talk to anyone in particular at Thor? I was able to get a wiring layout for my Synergy but was led to believe the detailed wiring and schematics might not be available to the public. That info is valuable for troubleshooting and for modifications so you have some valuable data.

[rbobcollins]

Looks like my dropdown bed and awning have lost power anyone know where the fuse is? Vegas 25.2

[Hooligan2]

Originally Posted by KC8RXQ

Bruce,
Did you talk to anyone in particular at Thor? I was able to get a wiring layout for my Synergy but was led to believe the detailed wiring and schematics might not be available to the public. That info is valuable for troubleshooting and for modifications so you have some valuable data.

...............................
I was also asked not to share. I don't have an Axis but on my Siesta there are some connectors behind the converter. My wiring in the overhead runs through the aluminum frames and the exit holes were ragged metal. I protected the wires with plastic loom to prevent cut or shorted wires. Also check any wire nuts for loose connection.