|
03-27-2018, 01:37 PM
|
#1
|
Senior Member
Brand: Thor Motor Coach
Model: Chatea 31E
State: Maryland
Posts: 455
THOR #5837
|
Protect A Tow installation on Class C
I have a Chateau 31E and I want to install a Protect A Tow. (The toad is a 2012 CR-V.) Eye bolts need to be installed at the back of the RV to attach the Protect A Tow to. I have the square section rear bumper as shown in the attached photo, and I stow my sewer hose in it, so I don't want to drill into that and have bolts protruding into it. I was thinking of using hose clamps around the bumper to hold some metal rings as attachment points, but wondering if there was a more elegant solution.
Has anyone here installed a Protect A Tow on their class C? Did you attach it to the rear bumper or some other place at the rear of the motorhome?
__________________
|
|
|
03-27-2018, 11:13 PM
|
#2
|
Member
Brand: Thor Motor Coach
Model: 31W
State: Virginia
Posts: 39
THOR #9713
|
Protect A Tow installation on Class C
I’m going to use heavy duty, outside grade ty wraps, or wire ties to wrap around my bumper with a small “d”ring to attach to. I believe four would do it. I’ll replace them periodically to ensure they are not deteriorating. I’ll post in about two weeks after I get set up for this. I have a 31w that looks exactly like yours. I don’t want to drill or otherwise permanently attach anything to the bumper either.
__________________
|
|
|
03-27-2018, 11:57 PM
|
#3
|
Senior Member
Brand: Thor Motor Coach
Model: 2023 Jayco Precept 31UL
State: Florida
Posts: 2,916
THOR #1589
|
Since the hose is round, and the bumper square, a bolt drilled near the bottom corner shouldn't interfere. (Now, if you drilled in the middle, you've created a problem.) All you need inside is enough for a nut and a washer. Put another nut and washer on the outside, to hold it snug. Those eyebolts don't need to be all that big, maybe 1/4th inch.
I have my Protect A Tow mounted to the metal bumper on my Vegas, and before it was on the fiberglass bumper of a Class A. Neither stow the hose in the bumper. If you are worried about the drilled hole rusting, hit it with some spray paint. Since it is on the bottom, you could just use black, if you don't have matching paint.
Those eyebolts need to be mounted to the bumper to properly protect your car. There really isn't any other place to mount it. I get that some folks get queasy when it comes to drilling holes in a vehicle. It's kinda like that first scratch or dent on a new car. The second one is easier!
__________________
Life is better when you cry a little, laugh a lot, and are thankful for everything you've got!
|
|
|
03-28-2018, 01:28 AM
|
#4
|
Senior Member
Brand: Thor Motor Coach
Model: Chatea 31E
State: Maryland
Posts: 455
THOR #5837
|
The heavy duty zip ties sound like a good solution. I was thinking stainless steel hose clamps with some friction tape between the clamp and the bumper to protect the bumper, but I think I'll try the zip ties and D-rings first.
__________________
|
|
|
05-10-2018, 05:20 PM
|
#5
|
Member
Brand: Thor Motor Coach
Model: 31W
State: Virginia
Posts: 39
THOR #9713
|
Ok, I had to drop my hitch to properly align my Jeep to the coach, I then had to provide a secure mount for he eye bolts. A section of plastic 4inch by 4” post cover did the trick Attachment 1
__________________
|
|
|
05-10-2018, 05:29 PM
|
#6
|
Senior Member
Brand: Thor Motor Coach
Model: Chatea 31E
State: Maryland
Posts: 455
THOR #5837
|
Jimi, thanks for the update.
So, I guess you needed to drop the eye bolt locations because of the drop receiver? I will also need to use a 4" drop receiver, and I was wondering if the protect a tow would stretch enough to work.
__________________
|
|
|
05-10-2018, 05:37 PM
|
#7
|
Member
Brand: Thor Motor Coach
Model: 31W
State: Virginia
Posts: 39
THOR #9713
|
I will take a photo after I fully hook it up. Looks like it’ll work fine. Yes I had to use a 4” drop. The protect a tow hooked up fine. I’ve got an idea on better coverage in the center, I’ll keep you posted.
__________________
|
|
|
05-11-2018, 10:07 PM
|
#8
|
Senior Member
Brand: Thor Motor Coach
Model: 2023 Jayco Precept 31UL
State: Florida
Posts: 2,916
THOR #1589
|
Quote:
Originally Posted by jabrabu
Jimi, thanks for the update.
So, I guess you needed to drop the eye bolt locations because of the drop receiver? I will also need to use a 4" drop receiver, and I was wondering if the protect a tow would stretch enough to work.
|
I had a 4" drop on my previous coach, and the ProtectATow worked fine with bolts in the bumper. Plenty of stretch in those bungee ropes.
__________________
Life is better when you cry a little, laugh a lot, and are thankful for everything you've got!
|
|
|
05-12-2018, 10:12 PM
|
#9
|
Member
Brand: Thor Motor Coach
Model: 31W
State: Virginia
Posts: 39
THOR #9713
|
I hooked every thing up today to check clearance, and fit. I’m satisfied with the install. I think adding the plastic post covers helped, in light of having to use a 4” drop receiver. Let’s “roll”...lol
__________________
|
|
|
05-12-2018, 10:20 PM
|
#10
|
Member
Brand: Thor Motor Coach
Model: 31W
State: Virginia
Posts: 39
THOR #9713
|
This is the fix I had in mind to support the center, above the receiver, but, I really don’t think I’ll need it(I have a tendency to over engineer projects...lol)
__________________
|
|
|
05-12-2018, 10:27 PM
|
#11
|
Senior Member
Brand: Thor Motor Coach
Model: 2023 Jayco Precept 31UL
State: Florida
Posts: 2,916
THOR #1589
|
That may work fine. I would be concerned about the gap, the possibility of rocks flying through there. Granted, most will fly straight back from the tires, but still, one is too many!
__________________
Life is better when you cry a little, laugh a lot, and are thankful for everything you've got!
|
|
|
05-13-2018, 01:02 PM
|
#12
|
Member
Brand: Thor Motor Coach
Model: 31W
State: Virginia
Posts: 39
THOR #9713
|
Quote:
Originally Posted by Mr Sunshine
That may work fine. I would be concerned about the gap, the possibility of rocks flying through there. Granted, most will fly straight back from the tires, but still, one is too many!
|
A chance but not probable as it’s out of line with the tires, opening is quite smaller than the photo indicates. If that occurs, I have a workaround for it [emoji106]
__________________
|
|
|
05-13-2018, 01:04 PM
|
#13
|
Member
Brand: Thor Motor Coach
Model: 31W
State: Virginia
Posts: 39
THOR #9713
|
Quote:
Originally Posted by Jimi
A chance but not probable as it’s out of line with the tires, opening is quite smaller than the photo indicates. If that occurs, I have a workaround for it [emoji106]
|
Actually the gap is taken up by the hitch itself.
__________________
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|