Thor Forums

Thor Forums (http://www.thorforums.com/forums/)
-   Thor Motor Coach | Class A, Class B+ & Class C Motorhomes (http://www.thorforums.com/forums/f17/)
-   -   CHF Question on 2015 ACE (http://www.thorforums.com/forums/f17/chf-question-2015-ace-17093.html)

Smeady64 05-01-2019 05:34 PM

CHF Question on 2015 ACE
 
I have been reading about the CHF. I have a 2015 ACE. It looks to me like the CHR would significantly change the angle where the vertical member attaches to the bar. Does this cause problems like excessive wear on the bearings? I would appreciate hearing about other people's experience.

Thanks,

halfprice 05-01-2019 06:50 PM

its


The chf has been done for years with no reported adverse effects. Do it. You'll be glad you did

Jerry

HaRVey 05-02-2019 12:12 AM

As stated previosly, many have done it without modifying or replacing the end links with longer versions without reporting any issues.
If you want to maintain the same sway bar angle you can either remove them and have someone cut and extend them (to 14" center to center) by adding a section of tube steel over the cut ends, welding (remove bushing firat so they dont melt) and reinstalling, or buy the Helwig adjustable links (~$80, your can find the exact part number on the IRV2 forum). Adjust the links to 14", and use the bushings, sleeves and bolts from the old link or you will need to get some different bolts to match the holes on the link and bar.


All times are GMT. The time now is 10:20 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2