Thor Forums

[Whirnot]

Kabutl asked that I post this info:

I installed a 10 Inch Quad view monitor in our Vegas as the dash mount is pretty much worthless when driving. It just can't be viewed safely. We are very happy with it. It was really easy to install, mostly plug and play into the existing connections under the dash panel. The trigger connections are easily traced using a volt meter and turning them on one by one. The cameras just plug in. The monitor shows 4 screens, one of course is blank cause there are only three cameras. When a turn signal is used or put in reverse, the screen goes full screen to that camera. You can configure to three screens but I didn't like the layout.
It is convenient and faces the driver. When preparing to turn in heavy traffic it is intuitive to check the screen you want as they are layed out as they look. if all is clear you then turn on the turn signal and get full screen.

The only thing that is flaky is the monitor seems to refresh itself every couple of minutes. Haven't figured out why, but will mess with it in warmer weather. I got the monitor from Rear View Safety.
Be prepared the documentation is almost worthless.