I did the removal and installation myself. It took a couple hours to take apart and remove but it but it was pretty simple. The most difficult part of putting the recliners in was attaching them to the slide out floor. I used metal L brackets and screwed them into the recliner metal frame on the bottom and then screwed them into the slide out floor with self drilling bolts. If you get a 90 degree drill extender it makes the job much easier. Make sure your bolts are short enough not to penetrate the floor too far so the slide won’t be impeded. This way I was able to use the recliners & seatbelts while the wife drives
it took about 2 more hours for the install.