Quote:
Originally Posted by golf-bears
When connected to city water hookup the Anderson water valve in my 2017 MS is leaking and filling the fresh water tank. It's filling at about 3 gallons per hour. I let it fill then turn off the city water and turn on the pump until the tank is empty. So not an emergency but needs to be fixed.
I have a new valve on the way from DRV.
Has anyone out there replaced their Anderson valve before? Any tricks or concerns I should be aware of before replacing the valve myself?
|
I replaced one last year. It is a simple procedure. There is a notched washer that goes on one end. If it is not installed correctly, the valve assembly will not seat correctly. (Yes, I got it wrong at first.) Once the washer is in correctly, the final nuts screws in easily.