Even though we had the schematics for our Hurricane the mounts for our panels didn't measure out to 16" between, so we just drilled into the roof panels (the TPO membrane and the plywood underneath) to mount them. We measured, drilled, and then used lots of Dicor when mounting them. Where the wiring went into the roof, we used Eternabond tape and more Dicor. We also used dabs of Dicor to "mount" the wiring between panels.
We have driven over 20,000 miles with our RV set up this way with no issues and no leaks of any kind.
__________________
John
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
|