Quote:
Originally Posted by Laco
Thought about it, but using an adjustable pressure regulator set to 53psi solved the inconsistent hot water problem. Its working pretty well now, but you just have to understand that if there is an interruption in water flow, your are going to have a cold water burst until the hot water arrives again.
|
I was told to set the panel to the desired temperature and only use the hot valve, no mixing. I've set it to 104*. It's mostly okay but shut the flow to lather up and it's cold again. @Laco, do you have a link? I know you mentioned it before.
__________________
I'm wearing trifocals now but my hindsight is 20/20.
*************
Bilsteins and Sumos front and rear...HUGE! FatMat and Hoodliner...HUGE!
Hellwig sway bars F&R, 235/85 Hankook ATM, alignment...HUGE!!!
Battery watering, 260watts Solar and BigFeets to make life easier.
|