Quote:
Originally Posted by schreinertms
Thanks bigben. The wiring diagram will be a big help and I will be ordering the Trombetta. Even if it turns out to be a different fix, at least I have one on standby. My first course of action is to clean all the terminals and connections. I've seen documentation that recommends this step as a bad ground can lead to the same symptoms.
|
I would do a simple check at the trombetta. On the trombetta, take the lead off that goes to your house batteries. Then I would check for voltage, with the motor running, on the same side that you just took the battery cable off. If you have 13.6 Volt or most anything over 13 volts, your trombetta is working. If you have no voltage the trombetta is not closing. Most likely this caused by the trombetta not the BIRD.