Quote:
Originally Posted by bigben
I would do a simple check at the trombetta. On the trombetta, take the lead off that goes to your house batteries. Then I would check for voltage, with the motor running, on the same side that you just took the battery cable off. If you have 13.6 Volt or most anything over 13 volts, your trombetta is working. If you have no voltage the trombetta is not closing. Most likely this caused by the trombetta not the BIRD.
|
I will give that a try. With just testing the house batteries with the engine running, how many volts should I be reading on a meter?