Thor Forums

[Thehobe1]

Originally Posted by Techn0

I am getting DC power to the inverter and AC power at the breaker inside. doesn't the inverter invert the DC to AC and then to the breaker? If it were the inverter, I shouldn't have AC power at the breaker? Is there any other way to test the inverter? I am not getting any inverter error messages while the inverter is on and I still get power to the breaker in pass through mode (inverter off).

NO! The inverter output selects between shore/gen and inverted 12V (also 115VAC) and then it's output, not the breaker panel, feeds the AC to the Refrigerator line. I have been through this. The breaker panel output does go into the inverter then the inverter chooses what to feed the AC line with that goes to your refrigerator and other outlets on 5B.

Your inverter is most likely not functioning or it is not getting it's 12V, high current input. My inverter has a twist out fuse for it's protection as well so check that.