|
Check for missing bulb seals on the inside of the slide wall. The bulb seal serves as a wire chase and if one or more are missing the cable running from the floor to the top of the wall will flop around and hit the wall. Eventually the cable will come loose from the slide motor and that is another issue. This happened on my Challenger during the shakedown cruise.
If you can see the cable running from the floor to the top of the wall the bulb seal is missing.
__________________
Dave
US Army (Ret)
2020 Entegra Accolade 37TS
2019 Jeep Grand Cherokee Trailhawk (Toad)
FMCA - F432054
|
Thor Forums
