Quote:
Originally Posted by TurnerFam
see if you have a 'Buss Fuse' in the battery area, maybe mounted on the wall, if a little yellow 'flag' is protruding, it's tripped the fuse....push it back in and see if you now have hydraulics for the legs...
also, you can go into 'Manual' mode and override the 'low voltage' error and lift the legs manually(auto retract button, press and hold)
|
I found the Bussmann breaker in the battery area. It was not tripped, but I tripped and reset it anyway. This didn't correct the problem.
I also found this control board under the bed behind the breaker panel. All the fuses looked good. I unplugged it and plugged it back in, hoping to reset it, but nothing changed. When it was disconnected there was still power to the control panel when the ignition switch was on, so that control panel apparently gets its power directly from the vehicle.
I tried manual mode and still got the low voltage error whenever I tried to retract or extend anything.
I'm not sure what to try next. Very frustrating.