I may have spent 8-10 hours or so over a few days. It’s kind of tight quarters and I had to clean the surfaces first. We als applied 2 layers to the bottom of the engine cover. Here’s a link to the Boom May I used:
https://www.amazon.com/050130-Under-...ACL&ref=plSrch the inner Wells I had made took a couple weeks to get from a sheet metal fabricator. I gave them the measurements and I made a model of the inner well out of the thin corrugated plastic sheets you can get a Home Depot. I made sure they would fit before having them made. After that I took them to LineX for the coating.
Thor Forums
