Quote:
Originally Posted by jazzfest
Hope someone can help. We had trouble getting the front shade to go down. At first it only lowered about 6 inches. After putting on the the brake, still no go.
I then started up the engine, even though we were told the key had to be out. The shade went down until it was about 2 inches from the dash.
The problem now is, it won't go up at all.
Has anyone had this problem.
Does anyone know where the motor is?
Thanks for any help.
|
I believe the shade motor is attached to the roller.
If the key is in the ignition and turned on the shade will only lower about 1 foot. This is a safety feature to prevent blocking a driver's field of vision. If the key is turned off then the shade should lower to the dash of to any point between.
On my coach the shade is manufactured by Irvine Shade and Door. Their web site is
Welcome | Irvine Shade and Door : Irvine Shade and Door
Here are the wiring instructions for the shade in my coach.
Irvine roller shade ES2512D-1.5NM_Instruction__Setting[1].pdf
You might want to give them a call.