|
The ceiling brace didn't work as I had hoped for. I had everything put back together but discovered the brace positioned the junction box about 1/2" too low for the plastic trim panel to be re-installed. Crap! What I ended up doing is using Heavy Duty Liquid Nails, and lots of it, to re-install the plywood panel to the ceiling and let it cure for 2 days. I finished putting the fan up today and all seems good, except for the junction box again. Somehow, even though I thought all was where it was supposed to be, the junction box is off center just enough for the decorative piece going around the motor doesn't fit. To hell with it. I don't watch the fan go 'round and 'round and can do without it. The fan is up. It seems to be a solid install. There's no wobble or noise when running. I'm good. DW maybe not so much but I can deal with that later.
Joe
__________________
Retired Illinois State Trooper, thankfully
2018 39DBRS3
2015 Ford F-350 DRW 6.7L
Distinguished Rifle #1506
NRA Highmaster
|
Thor Forums
