Dog house insulation...plus floor
I removed the seats of our Class C 31W (4 nuts and bolts per) and the doghouse. Then used race car grade thermal insulation (double faced aluminum foil with air filled pvc between the aluminum). Using a high strength 3M adhesive I first cut out and shaped the insulation for the doghouse then applied the 1/4 inch thick insulation to the engine side of the doghouse. I pulled the rubber floor mat and added insulation to the entire floor with a double layer over the rear engine, transmission, drivetrain area.
Result.. way less heat and road noise. Cost about $50 and a few hours of my time. I would consider this a low to medium skill level of DIY project. The wife is more comfortable and the dogs don’t get hot foot anymore
__________________
Scott and Connie
2018 Four Winds 31W
|