Quote:
Originally Posted by Mitch S
We have the EZ TOW, and haven't had any real problems. We tow a 2008 Chevrolet 2Uplander with no problems. We also towed a 2005 Equinox. The only thing I want to change is to get the hooks like are used on car carriers to tie down new cars. Using a frame hook would be easier than trying to wrap the chain around the frame.
|
We have a EZ Tow as well, and pull a 15 Ford Edge, which just fits the EZ Tow with 2" to spare on each side. My problem was the underside is completely covered with skirting/shields, and the A Arms are solid . I ordered 3' 10,000lb tie down straps , and run those through the wheel and hook the safety chains to them . IMO it provides as much or more Security as hooked through the frame, or A arm.
Will add pics when I hook up tomorrow.
Here are the straps I use. I set the safety chains to the proper length, and zip tied them in place with nearly 1/4" wide ties. I just drape the chain over the dolly frame run the straps, hook the chain's to the D Rings on the straps.