Thor Forums

[MichFigs]

Thanks for all your help and ideas, will add the GFI for the outside TV, thanks taylorbob1. Recently upgraded to the PD 4655V, now want to add the AIMS Pure Sine 1200. But noticed in the literature that AIMS recommends 4AWG or 2AWG (best)for feeding the unit. Should I upgrade my wires from the battery to the inverter, just to feed the receptacles that power the TVS as you all have done? Not adverse to doing this as it does not look like too big a challenge. The biggest wires at the DC board are 6AWG, is this enough for the inverter to run efficiently?