Quote:
Originally Posted by 16Pal36.3
I have found that I have to occasionally repeat the leveling process to allow me to get my "super slide" back in and to eliminate water leaking into my rig along the Schwintek rails on the ends of the slide.
I think that one or more of my leveling cylinders bleeds off over a few weeks. I have found that staying in one place too long is not good best to pack up and move every couple weeks. The DW is not happy.
|
Have you checked your hydraulic reservoir lately? I was having issues with getting the back leveler to touch if I was on an un-even site.
I noticed the reservoir wasn't where it needed to be - (1/2 inch from top when levelers are up), so I added the needed Auto Transmission Fluid fluid. Seems to help.
If you do add fluid, make sure your levelers are up before adding to avoid an over-fill situation.