TaylorB is correct.
Installing a remote switch next to your entrance way will make you life easier.
The Aims remote switch is a simple one button/one led light switch but it works fine.
Off = no light on (outlets wont work).
On = Yellow LED is bypassing the inverter (this is when the Genny is on
or hooked up to shore power so all the outlets work as normal).
On = Green LED is using inverter power only (no shore or Genny on).
Fault = RED LED is a problem light - never seen this one - I hope I dont.
FYI: Auto Transfer switch works so quickly I can have the TV on while hooked up to shore or Genny (light yellow is on), unhook one or the other and the TV never even flickers (and LED Light turns green).
I also have the Aims switch were I can see it from the drivers seat (looking over my shoulder) so I can tell if I left the inverter on (or off) for whatever reason.
__________________
2017 Axis / 25.4: Big Foot Levelers, Aims 1200 Watt inverter, Ceramic Window Tint, Full River AGM 6V batteries, Front Hellwig Sway bar / Rear Track Arm, Safe T Plus Steering Stabilizer, PD 4655 converter, Hard Wired Surge Guard, WEboost + WiFi Ranger, LED Headlights/Driving lights, TPMS, Surge tank, Tornado flush, Viair Compressor
|