Quote:
Originally Posted by Tfryman
The thermostat get's it's 12 VDC operating power from the furnace. There is an On/Off/Reset switch that if off/tripped will prevent power going to the thermostat but I believe it is more likely you may have blown the fuse that provides the 12 VDC to the furnace. That's the first place I would look.
|
So my first thought was a fuse or a breaker. The rig is in the garage, so I cannot put the slide out. When in it partially blacks my breaker/fuse panel. I know all the breakers were good. And of course Thor could not label the 15-20 different fuses. What I could pull were fine, but then I ran out of time and had somewhere to be.
I'll check the furnace reset you mentioned. If that's not it I'll back it out of the garage, run out the slide, and start checking fuses.