Quote:
Originally Posted by Gladinwj
That seems to be a good solution for the cabinet doors, and looks good too. Where did you get the hardware you used?
|
local Ace hardware store. About five bucks per door. I drilled a small 1/8" pilot hole from the back side to mark the proper place to drill from the front. Then I drilled from each direction with a 1/4" bit to avoid ripout. The red bottle is lock tight. I used just a small drop on each bolt. After installing the bolts I removed the factory screws therefore there were no lineup issues.
http://www.thorforums.com/forums/att...1&d=1549254249
__________________
2017 Gemini 23TR Ford chassis w/ power stroke 3.2
DW, Daughter and 2 dogs, Sofie (black lab/boxer) and Phoebe (schnoodle)
|