Quote:
Originally Posted by mikewess
I had my 2013 Palazzo hooked up to an outlet at home where it did fine charging to full prior, but I noticed that it had discharged somewhat. Found out it was a tripped breaker at the house, so I fixed it. But I happened to check the settings on the controls and found that it was set for flooded batteries. Now this would be ok a year ago, but I changed them out last year to AGM's. There is a setting for "AGM1" and also for "AGM2". Should I change the setting to one of these, and if so, which one? How do I tell what type I have? And shouldn't the dealer have done correct setting when installed? Is the only difference in the setting the charge rate?
|
Agm batteries are basically a deep cycle battery with higher amps, but they do have to charge at a slower rate(Amps) then flooded.