|
I've had good luck with heavy duty adhesive backed velcro (long wide rolls) which you can just mount the two directly together if there is enough of a flat edge on the top of the TV, or you can get a piece of 2" aluminum angle and velcro to the top back edge of the TV to created a larger surface and then velcro to that. Since your TV will basically be supporting the soundbar and gravity is working for you, the velcro will only have to keep it in place, not hold it up, so you shouldn't have to worry about heat weakening the adhesive and pulling away.
__________________
2018 Palazzo 33.2
|
Thor Forums
