Quote:
Originally Posted by Howard1257
is it easy to change the black water valve? Once you take out the 4 bolts does the area open up easily to remove the old and install the new. Thanks
|
Depends on how buried the valve is in the underside of the coach and how much movement there is with the pipes. You only need maybe 1/8 of wiggle room to spread the ends of the valve flange to slide the old out and new in.
Regarding a stiff dump valve I read a write of an owner adding a zerk fitting to the area the paddle slides into which worked to keep the seals and stem lubricated. I haven't needed to go this deep into the valve. Spraying the stem of open valve with silicone lubricant has worked well.
Mark My Words: Holes in the Roof, Stuck Dump Valves and Hose Fittings