Quote:
Originally Posted by Yosemitebob
So I found the switch but all looks fine, but not really knowing what I'm trying to find here is interesting in itself. I just made sure all fittings that were able to come apart, fit tightly. I disconnected what could be done and reattached it again. So results, none, except when I use the camera manually from the radio, it all works, reverse and the side cameras, but when you switch to off so the radio will work, then still nothing works. It must be the module that does all the switching, just not sure what that particular switch looks like, as there are several modules back there.
|
Did you happen to check the VIDEO switch box that collects the individual video signals from the mirrors & routes them to the radio video camera input port?
If that cable manages to loosen up, you'll get the symptoms you describe.
It's a silver box, about 3" square by 3/4" thick and it's located up around the dashboard. You'll know it when you see it. It has (should have) RCA wires in it. One of those wires goes to the rear of your radio. You might could trace that wire back from the radio to locate it too.
Worth checking out.