Thor Forums

[vt800c]

Originally Posted by Macaroon

I had the same problem on my 07 Winnebago Access. I took the screw out that was holding the bottom strip and let the end slide up to where it would not pop out of trim any more. Problem solved, can hardly notice that the insert is slightly shorter than before.

I had that problem on my Thor four winds. I pulled it out of the track all the way down. I loosened the bottom screw about a turn, and eased an extra inch out from where it's wrapped and tucked under. I tightened up the screw, and reinstated the trim in the track. No problem!!