Quote:
Originally Posted by dlbeck27
The cables run straight down and to the chasis and follow other wiring runs near the batteries. The wiring from the inverter back to breaker panel follows the other existing wires running to the breakers. The remote switch cable is a short run under the chasis above the steps and into the cabinet where the other switches are mounted. Tried to utilize existing raceways for wiring runs. Attachment 16988Attachment 16989Attachment 16990 |
The pos & neg cables from the batteries to the inverter run up and through the floor under the passenger's seat and connect to the back of the inverter.
__________________
Dave and Chris
US Navy (Ret),
KH2BD
|
Thor Forums
