Still Working through this BCC problem
Here is the latest:
Plugged into shore power: 13.1V House, 12.5V chassis (I believe this should be the same. It seems the relay is not working in the other direction either (house system not charging the chassis system).
Tried holding down aux start button: No change from above (no audible sound of the relay working either).
Unplug from shore power and start engine: 12.9v (and falling) House, 14.5v chassis. Wait 5 minutes and no change to the above. Try holding down aux start button and still no change.
My next step: after starting engine try cycling the Use/Store switch as I saw where that worked for some other person.
After that, I believe it is time to call the maker of the BCC for some support. I may have to replace a relay.
__________________
Aims 1200w pure sine inverter (non GFCI circuit)| Sumo Springs Front| Safe T Plus Steering Stabilizer| ARC shower rod| Vent Covers| EL120100C Battery Monitor| Progressive Surge Protector-Portable| Yamaha XT 225 on hitch carrier
|