|
My water pump is right under the couch in our Axis 25.2. I use the metal table post to hold the couch up when I work underneath. I use a flashlight/headlamp to see what I'm doing.
1. Turn off/unhook the city water
2. Turn off the water from the fresh water tank
3. Open a faucet to drain the pressure
4. Disconnect the in flow and out flow connections at the pump. They should only be finger tight.
5. Unscrew the 4 screws holding the pump to the floor
6. Reverse procedure to install the new pump.
7. Turn any water on slowly as you check for leaks
It's very easy and should only take 30 minutes.
__________________
|
Thor Forums
