Thor Forums

[TerryJames]

On the 2016-2017 Axis 25.2 reasonably easy to see what’s going on with the fresh water tank fill.
1) City water fill through gravity fill with simple push in hose ... will fill tank … can monitor under sofa if required. When completely full the over flow will come back out right next to the gravity fill.
2) When hooked up to city water through the other “water pressure” screw-in option, I’m pretty sure there is no need to turn off any valve associated with fresh water supply. You should not have your pump turned on when on city supply. The pump will have a “check valve” to prevent filling the fresh water tank from city water pressure input. If the city water pressure is so low you have to "supercharge" with the pump on … it’s really low and of course you’ll use water from your fresh water tank … but are you trying to
back flow/raise city water line?” … suggest go with the Oxy shower head and plan to only see that low of a City Water pressure once in a blue moon. Lastly, have you checked flow direction on your in-line fresh water filter and/or checked any water reducing valve setting on a regulator if installed and/or a fixed city water reduction orifice in your own line from the city water spigot to the Axis 25.2 pressure line input? Finally make sure you have an elbow on the city water input so you do not have a hose kinked.