Quote:
Originally Posted by Beau388
Not on my coach when it came from plant 750.. Romex all the way from the the 15 amp circuit breaker in the WFCO power center to the inverter and from the inverter to the steel electrical junction box where the three #14 ga Romex circuits branch originate. The only flexible electrical cable is the wring to the two duplex receptacles on the big slide (you wouldn't want Romex there). I rewired the entire coach when I upgraded to a 50 amp coach with PPS power center (5355) and 1800 watt Xantrex Freedom XI inverter.
|
Thanks for letting me know they ran Romex in and out of your inverter. I could probably rewire my inverter that way.
My inverter is in an outside storage compartment and then the wiring runs under the chassis to a hole in the floor that comes up behind the Power Control Board.
Might be worth pulling the flexible wiring and installing 14/2 Romex or even 12/2 if I decide to upgrade to the 1800W inverter at some point.