Quote:
Originally Posted by Chuck and Mary Ann
How are you holding the "treads" to the jack base?
|
I went down to my neighborhood Tractor Supply and bought the small recycled rubber stall mat that was on sale for $20. Cut 4 round oversized pads for my feet. Cut 4 pieces of 5/8" plywood to match. Cut a slot in the plywood because I didn't realize until later that you could remove the feet. Put the plywood on top of the steel pads and the rubber on the bottom. Drilled 4 holed for some 3/8" carriage bolts and inserted from the bottom with washers and lock nuts on top. Been working great for over two years now.