Thor Forums

[mountainsam]

Originally Posted by FloridaPhil

I am trying to find the proper tool to remove the lug nut covers on my Four Winds 26B. It is on a E450 chassis and I measured across the cover with a caliper and get about 1 1/8 inches. The first one I ordered was 1 1/2 and way too large. Also, do these covers unscrew or just pop off.

Thanks, Phil

Might pop off and might not. Could you post a picture of them. Mine have two nuts that lock them on. Mine are 1-1/8. I did find a tool for it after I went out and bought a 1-1/8 socket. The nuts that remove to release the cap have a small dimple on them.

http://www.thorforums.com/forums/att...1&d=1558663346