Quote:
Originally Posted by The Gritz Carlton
If you are referring to the side brackets that hold the awning "axle" in place, it could be that moisture has entered a small leak somewhere and the base material they are bolted/screwed into have become weak or the mounting screws/bolts just need tightening. If you're referring to the actual "axle" itself, it may be that you've hit something like tree branch and bent it. Can you attach a picture of the area?
|
I'm referring to the axles or the rods that secure the awning to the outside of the slide.
No I definitely did not hit any obstacles.
Both rods on each side are bent approximately at the same angle. They are touching the side of the rig. It appears the awning wasn't extending as much as the slide out was. Maybe an issue with the awning topper roller?