Quote:
Originally Posted by mawbs1
I did get an rf modulator but when I scan on the tv it's not being found I'm thinking these TVs won't accept vhf signal which is what I believe the rf modulator converts it to.
Thanks
|
You have to KNOW what the RF modulator does
Most likely it is converting it to an Analog signal on channel 3 or 4
If your TV(s) won't tune to the same Analog channel then it will not work
and
the power injector to the TV antenna amplifier has to be OFF in this case.
I would try a straight piece of coax from the modulator to a single TV first to see if that works.