Quote:
Originally Posted by Pops R
One you can see the supports behind the rear of the MH shell the screws are suppose to go into and two on the right side missed it completely so not a solid support.
|
I agree with you there and another example of poor QA/QC/Attention to detail on the part of Thor.
Quote:
Originally Posted by Pops R
The other two pics shows where the screw head just ripped out from the MH. I am not seeing any corrosion. In any case getting the replacement parts ordered so end of story here. Safe travels to all
|
No, the screw head ripped out from the ladder's leg base and I can clearly see corrosion in that area from your original pics. You see this type of corrosion all the time on boats that have aluminum parts held with stainless screws. The crappy installation may have contributed to this failure due to the stress/flexing at the point of failure but the main contributor was a crappy design and corrosion.