Quote:
Originally Posted by nosticks
Just finished adding a 20amp circuit for the a/c install tomorrow. I ran 12/2 romex from the roof vent to the outside Marinco 20 amp inlet plug. As others discovered, the vent had 12v wires laying inside the vent surround and those were used to pull the romex to a cabinet. From there the fun began. Eventually I was able to route it to the inlet plug. I invented new words along the way.
I did install a marine type (push to reset) circuit breaker in a box in the bedroom. I didn't want to rely on the cb's at the campgrounds. We'll see how the rest goes tomorrow.
|
I added a breaker in the bedroom cabinet also. And i went one step further. I added another Progressive hard wired 30 amp ems just for the ac. I know the ems is over kill but I like to know the voltage of all my systems and what amps they are pulling. Plus the protection to the new ac
Jerry
Thor Forums
