Quote:
Originally Posted by Stan fowler
I put a trailer brake controller on my 2015 Vegas several years ago. The stripped van chassis ( at least in 2015) had neither the brake wire or the power wire hooked up - there is no little plug under the dash like most other cars, trucks, and vans these days. The brake and power wire exists in some of the wiring harness , but is not connected at either end. At the hitch, you need to find the wires and connect to the 7 wire connector. At the front end, both wires terminate in the the wiring harness under the drivers seat ( harness along the frame ) , and you need to wire everything else to the controller.
If you have not done this before , might consider having a trailer place do it ( or the dealer if you are very rich...)
|
Yeah, $500-$800 was what I was being told. Not a chance. I'll either go with BT or RF controller, especially after looking at someone else's post where he HAD wired the 450 chassis himself! No freaking chance of me doing all of that. As Detective Callahan said, "A man has got to know his limitations."